HUNT MANUFACTURING CO. -- SPEEDBALL PRO INK 4800 SERIES TRANSPRNT BAS  -- 7510-00N009279
<pre>=====================  Product Identification  =====================

Product ID:SPEEDBALL PRO INK 4800 SERIES TRANSPRNT BAS
MSDS Date:05/13/1986
FSC:7510
NIIN:00N009279
=== Responsible Party ===
Company Name:HUNT MANUFACTURING CO.
Address:SPEEDBALL RD
City:STATESVILLE
State:NC
ZIP:28677
Info Phone Num:704-872-9511
Emergency Phone Num:704-872-9511
CAGE:08287
=== Contractor Identification ===
Company Name:HUNT MANUFACTURING CO.
Address:SPEEDBALL RD
Box:City:STATESVILLE
State:NC
ZIP:28677
Phone:704-872-9511
CAGE:08287

=============  Composition/Information on Ingredients  =============

Ingred Name:STODDARD SOLVENT
CAS:8052-41-3
RTECS #:WJ8925000
Fraction by Wt: 88%
Other REC Limits:N/K 
OSHA PEL:500 PPM
ACGIH TLV:100 PPM; 9293

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:N/K 
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:SEE SIGNS & SYMPTOMS OF OVEREXPOSURE .
Explanation of Carcinogenicity:N/K 
Effects of Overexposure:INHAL:SOLVENT VAPOR MAY CAUSE
    HEADACHE,DIZZINESS,NAUSEA,POSSIBLE NARCOSIS &
    ASPHYXIATION.SKIN:IRRITATION UPON REPEATED OR PROLONGED
    EXPOSURE.EYES:IRRITATION & TRANSIENT CORNEAL INJURY.INGEST: N/K (FP
     N/ORNL).OVEREXPOSURE TO MINERAL SPIRITSMAY CAUSE CENTRAL NERVOUS
    SYSTEM EFFECTS.
Medical Cond Aggravated by Exposure:N/K 

=======================  First Aid Measures  =======================

First Aid:INHAL:REMOVE SUBJECT TO FRESH AIR.GIVE ARTIFICIAL RESPIRATION
    IF BREATHING STOPPED.SEE PHYSICIAN.EYES:FLUSH W/ LARGE AMTS OF
    WATER FOR @ LEAST 15 MIN.SEE PHYSICIAN.SKIN:WASH AREA WITH SOAP &
    WATER.SEE  PHYSICIAN IF IRRITATION PERSISTS.INGEST:DO NOT INDUCE
    VOMITING.CALL A PHYSICIAN PROMPTLY.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:105F,41C
Lower Limits:0.5 ESTIMATE
Upper Limits:N/K 
Extinguishing Media:ALCOHOL FOAM,CARBON DIOXIDE,DRY CHEMICAL OR WATER
    SPRAY.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT .USE WATER SPRAY TO KEEP CONTAINERS COOL.
Unusual Fire/Explosion Hazard:THERMAL COMBUSTION PRODUCTS MAY INCLUDE
    CARBON MONOXIDE AND CARBON DIOXIDE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE SOURCES OF IGNITION & PROVIDE
    VENTILATION.LARGE SPILLS SHOULD BE DIKED & ABSORBED ON INERT
    MATERIAL SUCH AS SAND.
Neutralizing Agent:N/K 

======================	Handling and Storage  ======================

Handling and Storage Precautions:HANDLE AS COMBUSTIBLE LIQUID.THE
    MAXIMUM STORAGE TEMP IS 60C/140F.LIMIT STORAGE OF COMBUSTIBLE
    MATERIAL TO APPROVED AREA.
Other Precautions:GROUND ALL CONTAINERS WHEN TRANSFERRING MATERIAL.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
    EXPOSURE OF CONCERN .NONE REQUIRED IF GOOD VENTILATION IS
    MAINTAINED.OTHERWISE,WEAR SELF-CONTAINED BREATHING APPARATUS.
Ventilation:EXPLOSION-PROOF LOCAL EXHAUST VENTILATION AT POINT OF
    CONTAMINANT RELEASE.
Protective Gloves:IMPERVIOUS.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EYE WASH FACILITY,SAFETY SHOWERS.
Work Hygienic Practices:N/K 
Supplemental Safety and Health
BOILING RANGE:275-410F,135-210C,VAP DENSITY:HEAVIER THAN AIR.MFR ID
    NUMBER:4801,4831,4861,4891.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:SEE SUPP
Melt/Freeze Pt:M.P/F.P Text:N/K 
Decomp Temp:Decomp Text:N/K 
Vapor Pres:N/K 
Vapor Density:SEE SUPP
Spec Gravity:N/K 
Evaporation Rate &amp; Reference:SLOWER THAN ETHER
Solubility in Water:N/K 
Appearance and Odor:N/K 
Percent Volatiles by Volume:93

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
OXIDIZERS.
Stability Condition to Avoid:COMBUSTIBLE-AVOID IGNITION.
Hazardous Decomposition Products:USUAL PRODUCTS OF COMBUSTION-CARBON
    MONOXIDE AND CARBON DIOXIDE.
Conditions to Avoid Polymerization:AVOID CONTACT WITH STRONG OXIDIZERS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
    FEDERAL,STATE & LOCAL REGULATIONS .WHEN DISCARDED THIS MATERIAL IS
    A HAZARDOUS WASTE.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.