FISKE BROTHERS REFINING CO -- LUBRIPLATE, 105  -- 9150-00-076-1584
<pre>=====================  Product Identification  =====================

Product ID:LUBRIPLATE, 105
MSDS Date:01/01/1994
FSC:9150
NIIN:00-076-1584
=== Responsible Party ===
Company Name:FISKE BROTHERS REFINING CO
Address:1500 OAKDALE AVE
City:TOLEDO
State:OH
ZIP:43605
Country:US
Info Phone Num:419-691-2491
Emergency Phone Num:800-255-3924
Preparer's Name:JAMES R KONTAK
CAGE:9N579
=== Contractor Identification ===
Company Name:FISKE BROS REFINING CO
Address:129 LOCKWOOD ST
Box:City:NEWARK
State:NJ
ZIP:07105-4720
Country:US
Phone:201-589-9150
CAGE:73219
Company Name:FISKE BROTHERS REFINING CO
Address:1500 OAKDALE AVE
Box:City:TOLEDO
State:OH
ZIP:43605
Country:US
Phone:419-691-2491
CAGE:9N579

=============  Composition/Information on Ingredients  =============

Ingred Name:NON-HAZARDOUS INGREDIENTS
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:PROLONGED OR REPEATED SKIN
    CONTACT MAY CAUSE IRRITATION. PRODUCT CONTACTING EYES MAY CAUSE
    IRRITATION. HUMAN HEALTH RISKS VARY FROM PERSON TO PERSON. AS
    PRECAUTION, EXPOSURE TO LIQUIDS, VAPORS,  MISTS & FUMES SHOULD BE
    MINIMIZED. THISPRODUCT HAS LOW ORDER OF ACUTE ORAL TOXICITY, BUT
    MINUTE AMTS (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:ASPIRATED INTO THE LUNGS DURING
    INGESTION MAY CAUSE MILD TO SEVERE PULMONARY INJURY.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYE:FLUSH W/CLEAR WATER FOR @ LST 15 MINS OR UNTIL IRRITATION
    SUBSIDES. IF IRRIT PERSISTS, CONSULT PHYS. SKIN:REMOVE ANY CONTAMD
    CLTHG & WASH W/SOAP & WARM WATER. IF INJECTED BY HIGH PRESS UNDER
    SKIN,  REGARDLESS OF APPEARANCE OR ITS SIZE, CONT PHYS IMMED. DELAY
    MAY CAUSE LOSS OF AFFECTED PART OF BODY. INHAL:VAP PRESS IS VERY
    LOW & INHAL @ ROOM TEMP IS NOT PROBLEM. IF OVERCOME BY VAPOR
    FROM(SUPDAT)

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:360F,182C
Lower Limits:0.9%
Upper Limits:7.0%
Extinguishing Media:FOAM, DRY CHEMICAL, CARBON DIOXIDE OR WATER
    SPRAY(FOG).
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT . COOL EXPOSED CONTAINERS WITH WATER.
Unusual Fire/Explosion Hazard:DO NOT STORE OR MIX WITH STRONG OXIDANTS.
    EMPTY CONTAINERS RETAIN RESIDUE. DO NOT CUT, DRILL, GRIND, OR WELD,
    AS THEY MAY EXPLODE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SCRAPE UP GREASE, WASH REMAINDER WITH SUITABLE
    PETROLEUM SOLVENT OR ADD ABSORBENT. KEEP PETROLEUM PRODUCTS OUT OF
    SEWERS & WATER COURSES. ADVISE AUTHORITIES IF PROD HAS ENTERED OR
    MAY ENTER SEWERS & W ATER COURSES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP CONTAINERS CLOSED WHEN NOT IN
    USE. DO NOT HANDLE OR STORE NEAR HEAT, SPARKS, FLAME, OR STRONG
    OXIDANTS.
Other Precautions:REMOVE OIL-SOAKED CLOTHING AND LAUNDER BEFORE REUSE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NORMALLY NOT NEEDED. NIOSH APPROVED RESPIRATOR
    APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST:USED TO CAPTURE FUMES AND VAPORS.
Protective Gloves:OIL-RESISTANT GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:USE OIL-RESISTANT APRON, IF NEEDED. ANSI
    APPRVD EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:CLEANSE SKIN THOROUGHLY AFTER CONTACT.
Supplemental Safety and Health
SPEC GRAV:0.89-0.93. FIRST AID PROC:HOT PROD IMMED REMOVE FROM EXPOS &
    CALL PHYS. INGEST:CALL PHYS IMMED. DO NOT INDUCE VOMIT.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>550F,>288C
Melt/Freeze Pt:M.P/F.P Text:SEMI-SOLID
Vapor Pres:<0.01
Vapor Density:>5
Spec Gravity:SUPDAT
Evaporation Rate &amp; Reference:<0.01 (BUTYL ACETATE =1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:SMOOTH, WHITE GREASE WITH MINERAL OIL ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDANTS LIKE LIQUID CHLORINE, CONCENTRATED
    OXYGEN.
Stability Condition to Avoid:NOT APPLICABLE.
Hazardous Decomposition Products:OR BYPRODUCTS MAY FORM SO*2. IF
    INCOMPLETE COMBUSTION, CARBON MONOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:ASSURE CONFORMITY WITH APPLICABLE FEDERAL,
    STATE, AND LOCAL DISPOSAL REGULATIONS. DIPOSE OF ABSORBED MATERIAL
    AT AN APPROVED WASTE DISPOSAL FACILITY OR SITE.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.