BORDEN INC -- ELMER'S GLUE STICK, E510  -- 8040-00N087975
<pre>=====================  Product Identification  =====================

Product ID:ELMER'S GLUE STICK, E510
MSDS Date:01/04/1993
FSC:8040
NIIN:00N087975
=== Responsible Party ===
Company Name:BORDEN INC
Address:180 EAST BROAD ST
City:COLUMBUS
State:OH
ZIP:43215
Country:US
Info Phone Num:614-831-6680
Emergency Phone Num:614-431-6600
CAGE:07982
=== Contractor Identification ===
Company Name:BORDEN CHEMICAL CO
Address:180 E BROAD ST
Box:City:COLUMBUS
State:OH
ZIP:43215-3705
Country:US
Phone:614-225-6124
CAGE:86142
Company Name:BORDEN INC
Address:180 E BROAD ST
Box:208
City:COLUMBUS
State:OH
ZIP:43215-3705
Country:US
Phone:614-225-6124
CAGE:07982

=============  Composition/Information on Ingredients  =============

Ingred Name:NON-HAZARDOUS INGREDIENTS
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:SKIN
    ABSORPTION/INGESTION/INHALATION:NOT TOXIC DERMALLY, ORALLY OR BY
    INHALATION WHEN TESTED AS DESCRIBED IN 16 CFR PART 1500.3 (C) (1)
    AND (2). SKIN:NOT AN IRRITANT WHEN TESTED AS DESCRIBED IN 16 CFR 
    PART 1500.41. EYES:MAY CAUSE IRRITATION ON PROLONGED OR REPEATED
    CONTACT. SLIGHTLY IRRITATING WHEN (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:TESTED AS DESCRIBED IN 16 CFR PART
    1500.42.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTF
    RESP) . SKIN:FLUSH W/COPIOUS AMOUNTS OF WATER. CALL MD .
    INGEST:DILUTE BY DRINKING LG QTYS OF WATER. IMMED CONT POIS CTL
    CTR/HOS PITAL EMER ROOM FOR ANY OTHER ADDNL TREATMENT DIRECTIONS.
    EYES:IMMEDIATELY FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINUTES.
    CALL MD IF IRRITATION PERSISTS.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE . WILL NOT BURN
    UNLESS WATER HAS EVAPORATED.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT . IN CASE OF FIRE, WATER SHOULD BE USED TO KEEP
    FIRE-EXPOSED CONTAINERS COOL.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SWEEP (SCOOP) UP & REMOVE TO A CHEMICAL
    DISPOSAL AREA. PREVENT ENTRY INTO NATURAL BODIES OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP FROM FREEZING. STORE IN A COOL,
    DRY PLACE. KEEP CONTAINERS TIGHTLY CLOSED.
Other Precautions:AVOID PROLONGED OR REPEATED CONTACT W/EYES. INSTRUCT
    YOUR WORKERS TO HANDLE THIS PRODUCT PROPERLY.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH APPROVED RESPIRATOR APPROPRIATE FOR
    EXPOSURE OF CONCERN . NO SPECIAL PROTECTION NECESSARY.
Ventilation:NO SPECIAL CONTROL MEASURES NECESSARY UNDER NORMAL
    CONDITIONS OF USE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
    ANSI DESIGN CRITERIA . NO SPECIAL PROTECTION NECESSARY.
Work Hygienic Practices:HANDLE I/A/W GOOD INDUSTRIAL HYGIENE & SAFETY
    PRACTICES.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:212F,100C
Melt/Freeze Pt:M.P/F.P Text:32.0F,0.0C
Vapor Pres:17.5 @ 20C
Vapor Density:<1
Spec Gravity:1.0
pH:10@25C
Evaporation Rate &amp; Reference:<1 (BUTYL ACETATE=1)
Solubility in Water:DISPERSIBLE
Appearance and Odor:WHITE SOLID; SLIGHT BLAND ODOR.
Percent Volatiles by Volume:58

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG BASES, OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:OXIDES OF CARBON & NITROGEN.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF ACCORDING TO LOCAL STATE/PROVINCIAL &
    FEDERAL REQUIREMENTS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.