DYNATRON/BONDO CORP -- DYNALITE492,493,494,496,497LT WT BODY FILLR  -- 8010-01-060-7176
<pre>=====================  Product Identification  =====================

Product ID:DYNALITE492,493,494,496,497LT WT BODY FILLR
MSDS Date:11/11/1985
FSC:8010
NIIN:01-060-7176
Kit Part:Y
=== Responsible Party ===
Company Name:DYNATRON/BONDO CORP
Address:3700 ATLANTA INDUSTRIAL PARKWAY N W
City:ATLANTA
State:GA
ZIP:30331-1098
Country:US
Info Phone Num:404-351-2730
Emergency Phone Num:404-696-2730 0R 800-241-3386
CAGE:16522
=== Contractor Identification ===
Company Name:AEROFAB CO INC.
Address:2335 GOODRICH ST
Box:City:FERNDALE
State:MI
ZIP:48220-1440
Country:US
Phone:313-542-0051
CAGE:01685
Company Name:BONDO/MAR-HYDE CORP
Address:3700 ATLANTA INDUSTRIAL PKWY NW
Box:City:ATLANTA
State:GA
ZIP:30331
Country:US
Phone:404-696-2730
CAGE:16522
Company Name:T. J. MACHINE & TOOL CORP.
Address:700 W MAIN STREET
Box:City:AZLE
State:TX
ZIP:76020
Country:US
Phone:817-444-5548
CAGE:4K455

=============  Composition/Information on Ingredients  =============

Ingred Name:TITANIUM DIOXIDE
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: 1%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293

Ingred Name:UNSATURATED POLYESTER RESIN
CAS:26123-45-5
Fraction by Wt: >50%

Ingred Name:DIMETHYLANILINE (N,N-DIMETHYL-ANILINE)  (SARA III)
CAS:121-69-7
RTECS #:BX4725000
Fraction by Wt: <0.1%
OSHA PEL:S, 5 PPM/10 STEL
ACGIH TLV:S,5 PPM/10 STEL;9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Ingred Name:STYRENE, MONOMER  (SARA III)
CAS:100-42-5
RTECS #:WL3675000
Fraction by Wt: <16%
OSHA PEL:100 PPM
ACGIH TLV:S,50PPM/100STEL;9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:SEE INGRD
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:SEE SIGNS AND SYMPTOMS DATA.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:MINOR SKIN IRRITATION FROM CONTACT WITH
    MATERIAL, EYE AND UPPER RESPIRATORY IRRITATION FROM VAPORS OF
    MATERIAL.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:IN CASE OF EYE CONTACT. FLUSH WITH PLENTY OF WATER, GET
    MEDICAL ATTENTION. WASH SKIN WITH SOAP AND WATER. IF INGESTED, GET 
    MEDICAL ATTENTION IMMEDIATELY.

=====================  Fire Fighting Measures  =====================

Flash Point:100F (TOC)
Lower Limits:1.1
Upper Limits:6.1
Extinguishing Media:CO2, FOAM, SODIUM BICARBONATE, DRY CHEMICALS.
Fire Fighting Procedures:VENT SMOKE  AND USE NIOSH/MSHA APPROVED SCBA
    AND FULL PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:VAPORS ARE HEAVIER THAN AIR.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE BY EMPLOYING ORDINARY PHYSICAL MEANS.
    I.E., SHOVELING, WIPING. SWEEP/CLEAN WITH INERT MATERIALS SUCH AS
    SAND, VERMICULITE AND PLACE IN CLOSED CONTAINER FOR DISPOSAL AS
    SOLID WASTE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE NEAR OPEN FLAME OR SOURCE
    OF HEAT. AVOID IMPROPER ADDITION OF PROMOTERS AND OXIDIZING AGENTS.
Other Precautions:CLEAN HANDS WITH SOAP AND WATER AFTER EVERY USAGE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
    FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST AND MECHANICAL (GENERAL) RECOMMENDED.
Protective Gloves:RUBBER GLOVES
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:SAFETY SHOWERS AND EYE WASH STATION SHOULD
    BE AVAILABLE. EYE PROTECTION RECOMMENDED.
Work Hygienic Practices:WASH HANDS WITH SOAP AND WATER AFTER EVERY
    USAGE.
Supplemental Safety and Health
NONE.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>295F,>146C
Vapor Pres:7@20C
Vapor Density:3.6
Spec Gravity:1.20
Solubility in Water:SLIGHT
Appearance and Odor:GREY VISCOUS COMPOUND W/PUNGENT STYRENE ODOR
Percent Volatiles by Volume:<16

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
ORGANIC PEROXIDES, STRONG ACIDS. AND OXIDIZING AGENTS
Stability Condition to Avoid:EXPOSURE TO SOURCES OF IGNITION IN
    CONFINED AREAS.
Hazardous Decomposition Products:STYRENE VAPORS, CARBON MONOXIDE AND
    DIOXIDE
Conditions to Avoid Polymerization:UNREGULATED CONTACT WITH ORGANIC
    PEROXIDES, OPEN FLAME AND PROLONGED STORAGE ABOVE 100F.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSAL MUST BE CONFORMED TO LOCAL, STATE AND
    FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.